DIRECTV SWM-8 Single Wire Multi-Switch with 29 volt Power Inserter (8 Channel) (SWM-8)

  • DIRECTV SWM-8 Single Wire Multi-Switch with 29 volt Power Inserter (8 Channel) (SWM-8)

Model Name: SWM-8

Price: $79.99

QUANTITY:

Model: SWM-8

Availability: IN Stock

Eight channel Single Wire Multi-switch (SWM). Allows any transponder from any satellite input to be independently selected and distributed via one of eight designated SWM output frequency channels.

  • Die-cast housing is suitable for both indoor and outdoor use
  • Compatiable with the D12, R16, R22 all H and HR series receivers
  • 29 volt Power Supply Included
  • Installation reference guide found HERE

The new SWM-8 allows installers to run an AT9 or AU9 DirecTV satellite antenna plus 2 Flex ports (72.5 & 95) down a single RG6 Coaxial cable! At the end of the single wire a SWS-2, SWS-4, or SWS-8 splitter is required (not included) to distribute the signal to as many as 4 DVRs or 8 HD receivers! Please Note the SWS series of splitters are specially designed for the SWM-8; you must have an SWS-2, SWS-4, or SWS-8.

The SWM Port Single Wire Solution is ONLY compatible with the H20, HR20 (Firmware .2042), H21, and HR21.

The three "Legacy" ports are compatible with all older Receivers, however, each single tuner receiver using the "Legacy" port requires a cable running directly to the SWM-8 unit. DVRs using the "Legacy" ports require 2 cables coming back to the SWM-8 unit.

FEATURES

Provides eight (8) independent channels for supporting up to 8 DIRECTV satellite tuners
Provides two outputs to serve two customer dwellings (typical)
Contains a built-in diplexer for combining off-air signals with DIRECTV satellite signals onto a single home-run wire to the dwelling
A compatible splitter(Not Included) is needed for multiple receiver installations
Provides AGC for the satellite input signal.
Die-cast housing is suitable for both indoor and outdoor use.
Supports six (6) LNB inputs, each triple-band stacked four ports (Ports 1 - 4) cover existing 99/101, 103/110/119 satellites, plus two Flex Ports (95 sat and 72.5 sat)
Uses only 1 RG6 between SWM-8 and STS Splitter (not included)
Maximum Distance from SWM8 to Splitter: 200
29 volt Power Supply Included

SWM Port Compatible With:

HR20-100 through HR20-700 w/ .2042 Firmware Update
HR21-100 through HR21-700
H20-100 through H20-700 w/ .2042 Firmware Update
H21-100 through H21-700
R16-100 through R16-700
D12-100 through D12-700
D13-100 through D13-100

Specifications:

Satellite Input Frequency Range: 250 - 2150Mhz
Terrestrial & SMATV Input Frequency Range: 54 - 806Mhz
Return Path Input Frequency Range: 5 - 40 (CMTS return path must use 33-40 MHz band)
Number of Input Ports: 6 Satellite & 1 Terrestrial /SMATV
Input Signal Power Level: dBm -45 to -15 dBm per transponder
Output Frequency Range: MHz 950 - 2150 (Satellite) & 54 - 806 (Terrestrial & SMATV)
SWM Channel frequencies: MHz 950 - 1800 (Channels 1-9)
Satellite SWM Module Output Ports: 6 per SWM Module
Terr/SMATV/Return SWM Module Output Ports: 1 per SWM Module
Output Signal Power Level dBm -31 dBm (min) per SWM channel
DC Power: Power Supply (29Vdc, 1.5A)
Ground Stud: 1
Dimensions: LxWxH mm 167x145x35
Weight: kg 0.5
Operating temperature range: C -34 to +52

There are currently no product reviews.

Please Login to write Review
Categories
Manufacturers